Cisco Small Business WAP551 Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротова точка доступу Cisco Small Business WAP551. Cisco Small Business WAP551 13 сторінок. Reboot and reset to factory default settings
Також для Cisco Small Business WAP551: Технічний паспорт (8 сторінок), Огляд (6 сторінок), Швидкий старт Quide (13 сторінок), Брошура та технічні характеристики (4 сторінок), Посібник (4 сторінок)

Cisco WAP551 and WAP561 Wireless-N

Access Points Features

Front Panel

The front panel of the devices consists of three lights: Power, WLAN, and

LAN. For full descriptions of the colors of the lights and their indications,

see

"Verifying the Hardware

A Kensington lock slot is found under the lights.

The back panel of the devices has an RJ-45 Ethernet port. Use the

Ethernet port to power your device using PoE. It is an auto-sensing,

Gigabit Ethernet (802.3) port used to connect your WAP devices to

network devices, such as computers, routers, or switches. Cisco strongly

recommends using Category 5e or better cable for Gigabit

connectivity.

The side panel of the devices has a Reset button. See

Devices or Returning them to their Factory Default Settings"

information on the Reset button.

Default Settings

Parameter

Username

Password

LAN IP Address

Fallback LAN IP

Subnetwork Mask

If you are using a Cisco RV Series router, the default range for the DHCP

assigned address is from 192.168.1.100 to 192.168.1.254. Any device

connecting to the same LAN will be assigned an IP address in this range.

Cisco WAP551 and WAP561 Wireless-N Access Points

Installation".

Default Value

cisco

DHCP address assigned

by server

192.168.1.245

255.255.255.0

"Rebooting the

for