Cisco 3140 Початок роботи - Сторінка 30
Переглянути онлайн або завантажити pdf Початок роботи для Мережеве обладнання Cisco 3140. Cisco 3140 42 сторінки.
Також для Cisco 3140: Посібник (42 сторінок)
Друкувати сторінку
Configuration After Initial Setup
Setting
Management access through
data interfaces.
System time.
Smart license.
Inside interface IP address.
DHCP server for inside clients.
DHCP auto-configuration for
inside clients.
(Auto-configuration supplies
clients with addresses for WINS
and DNS servers.)
Getting Started
30
Configuration
A data interface management access list rule allows HTTPS access
through the inside interface. SSH connections are not allowed.
Both IPv4 and IPv6 connections are allowed.
Firepower 4100/9300: No data interfaces have default
management access rules.
ISA 3000: No data interfaces have default management access
rules.
FTDv: No data interfaces have default management access rules.
The time zone and NTP servers you selected.
Firepower 4100/9300: System time is inherited from the chassis.
ISA 3000: Cisco NTP servers: 0.sourcefire.pool.ntp.org,
1.sourcefire.pool.ntp.org, 2.sourcefire.pool.ntp.org.
Either registered with a base license, or the evaluation period
activated, whichever you selected.
Subscription licenses are not enabled. Go to the smart licensing
page to enable them.
192.168.95.1/24
Firepower 4100/9300: Data interfaces are not pre-configured.
ISA 3000: None. You must set the BVI1 IP address manually.
FTDv: 192.168.45.1/24
Running on the inside interface with the address pool 192.168.95.5
- 192.168.95.254.
Firepower 4100/9300: No DHCP server enabled.
ISA 3000: No DHCP server enabled.
FTDv: The address pool on the inside interface is 192.168.45.46
- 192.168.45.254.
Enabled on outside interface if you use DHCP to obtain the outside
interface IPv4 address.
If you use static addressing, DHCP auto-configuration is disabled.
Getting Started
Explicit, implied, or default
configuration
Implied.
Explicit.
Explicit.
Default.
Default.
Explicit, but indirectly.