Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Посібник з усунення несправностей - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з усунення несправностей для Мережеве обладнання Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base. Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 23 сторінки. Installing the controller
Також для Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base: Посібник (11 сторінок)

Друкувати сторінку

Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Посібник з усунення несправностей

Troubleshooting

•

This is done so that you need not press the button to physically start the appliance even after all the LEDS

Note

are up.This can be changed in CIMC if required

Service port is not working when CIMC port is connected

Solution

•

You can also figure this by comparing chassis mac and Burned in MAC

(Cisco Controller) >show imm chassis mac

MAC Address: a4:6c:2a:39:0f:be

(Cisco Controller) >show inventory

Burned-in MAC Address............................ A4:6C:2A:39:0F:BF

Check if the show imm chassis mac and show inventory mac are conservative and not the same.

Otherwise it will cause discrepancy.

If this happens check if the NIC is set to be in shared more in CIMC

Note

Cisco 5520 and 8540 Wireless Controller Troubleshooting Guide

Set the default power restore policy to power on.

Check if the NIC is in dedicated mode