Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Panduan Pemecahan Masalah - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Perangkat Keras Jaringan Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base. Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 23 halaman. Installing the controller
Juga untuk Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base: Manual (11 halaman)
Halaman Cetak
Troubleshooting
•
This is done so that you need not press the button to physically start the appliance even after all the LEDS
Note
are up.This can be changed in CIMC if required
.
Service port is not working when CIMC port is connected
Solution
•
You can also figure this by comparing chassis mac and Burned in MAC
(Cisco Controller) >show imm chassis mac
MAC Address: a4:6c:2a:39:0f:be
(Cisco Controller) >show inventory
Burned-in MAC Address............................ A4:6C:2A:39:0F:BF
Check if the show imm chassis mac and show inventory mac are conservative and not the same.
Otherwise it will cause discrepancy.
If this happens check if the NIC is set to be in shared more in CIMC
Note
Cisco 5520 and 8540 Wireless Controller Troubleshooting Guide
18
Set the default power restore policy to power on.
Check if the NIC is in dedicated mode