Cisco Aironet 1250 Series Посібник - Сторінка 25

Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco Aironet 1250 Series. Cisco Aironet 1250 Series 37 сторінок. Aironet 1250 series
Також для Cisco Aironet 1250 Series: Посібник з конфігурації (40 сторінок), Технічний паспорт (14 сторінок), Посібник з встановлення обладнання (10 сторінок)

Follow these steps to connect the access point to an Ethernet LAN when you

are using a local power source:

Step 1

Connect a Category 5E (or higher) Ethernet cable to the RJ-45

Ethernet connector labeled Ethernet on the access point.

Step 2

Connect the 1250 series DC power module's output connector to the

access point's DC-IN power connector.

Step 3

Plug the other end of the Ethernet cable into an unpowered Ethernet

port on your LAN network.

Step 4

Plug the 1250 series DC power module's AC power cord into an

approved 100- to 240-VAC outlet.

Configuring the Access Point

How you configure your access point depends on how you intend to use it in

your wireless network. This guide provides a brief synopsis of the

configuration process. For detailed information, refer to the "Configuring the

Access Point for the First Time" chapter of the Cisco IOS Software

Configuration Guide for Cisco Aironet Access Points for the Cisco IOS

release you are using.

Quick Start Guide: Cisco Aironet 1250 Series Access Point