Cisco Aironet 340 Series Посібник із швидкого старту - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 сторінок. Usb client adapter
Також для Cisco Aironet 340 Series: Посібник із швидкого старту (12 сторінок), Посібник із швидкого старту (13 сторінок), Примітки до випуску (14 сторінок), Посібник із швидкого старту (16 сторінок), Посібник із швидкого старту (12 сторінок)

Cisco Aironet 340 Series Посібник із швидкого старту
Systems operating as a point-to-multipoint system or using non-directional antennas cannot
exceed +36 dBm EIRP power requirement under any circumstances and do not require
professional installation.
Department of Communications—Canada
Canadian Compliance Statement
This class B Digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material
broilleur du Canada.
This device complies with RSS-210 of Industry Canada. Operation is subject to the following
two conditions: 1) this device may not cause harmful interference, and 2) this device must
accept any interference received, including interference that may cause undesired operation.
The device is certified to the requirements of RSS-139-1 for 2.4 GHz spread spectrum devices.
The use of this device in a system operating either partially or completely outdoors may require
the user to obtain a license for the system according to the Canadian regulations. For further
information, contact your local Industry Canada office.
9
European Telecommunications Standards Institute
Statement of Compliance
Information to User
This equipment has been tested and found to comply with the European Telecommunications
Standard ETS 300.328. This standard covers Wideband Data Transmission Systems referred to
in CEPT recommendation T/R 10.01.
This type accepted equipment is designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.