Sony R-D-S EON MHC-2900 Інструкція з експлуатації Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Sony R-D-S EON MHC-2900. Sony R-D-S EON MHC-2900 35 сторінок.
Друкувати сторінку> continued
Notes
The following messages may appear if a
station is not providing a particular RDS
service:
"No PTY Data" (When the receiving
station does not broadcast the programme
type you selected.)
"No Text Data" (When the receiving
station does not broadcast the radio text
data.)
¢ if there is an emergency announcement
by governmental authorities, "PTY
Alarm" flashes in the display.
Information Programmes
(EON)
This procedure shows you how to have the
unit automatically switch from the
currently selected function to the network
RDS station broadcasting a traffic, news or
information programme. When the station
begins broadcasting one of these
programmes, the unit automatically tunes
in the programme and TA, NEWS or INFO
flashes in the display according to the
selected programme. After the programme,
the unit switches back to the last selected
function.
POWER—ON
1 Press EON to select the desired
programme to be monitored.
Each time you press this button, the
display changes cyclically as follows :
TA
>
NEWS
(no display)
«~
INFO
TA
TUNED
PRESET
'
3
Me
«25k
63k
16K
(Hz
The unit enters the EON standby mode
and TA, NEWS or INFO appears in the
display. If there is no station which
broadcasts the programme you
selected,"No TA", "No News" or "No
Info" appears.
Chapter 3 : the Radio
2 When the station which broadcasts the
programme you selected is tuned in,
"TA", "NEWS" or "INFO" flashes in the
display.
After the programme ends, the unit
switches back to the original function.
— TA
P.
PRESET
:
63
360
400
tk
25k 62k
15k
(He)
To stop monitoring the programme
Press the EON button once.
The unit returns to the currently selected
EON standby mode.
To receive the RDS information while
the system power is turned off
Because EON standby mode works even
when the power is off, there is no need to
leave the radio playing unnecessarily. This
feature allows you to listen only when the
information that you want to hear is being
broadcast.
4
Press EON so that TA, NEWS or INFO
appears in the display. The unit enters
the EON standby mode.
2 Press SYSTEM POWER to turn off the
system.
"EON Wait?" and "Push EON KEY"
appear alternately.
3 Press EON within 6 seconds.
"EON WAITING" appears in the
display. The unit goes into the EON
standby mode, and the system power is
automatically turned on upon receiving
an EON programme. When the
programme is finished, the unit is
turned off and returns to the EON
standby mode.
Notes
¢ When the currently being received station
broadcasts the Traffic-Announcement
Identification, "Now TA" appears in the
display.
¢ When the currently being received station
broadcasts the programme you selected
(TA, NEWS or INFO), the station will not
switch.
¢ Not all RDS stations provide EON service.
¢ "Weak Signal" appears if the EON station
which the unit automatically switched to
cannot provide RDS data due to a weak
signal.
¢ "Returning" appears about 4 minutes
after a signal from an EON station which
becomes weak, thus preventing the
station from providing RDS data. This
indicates that the unit is attempting to re-
tune the EON station.
Notes on EON and recording
¢ While in the middle of recording, the
EON receiving function does not operate.
¢ When beginning recording during EON
reception, the recording will
automatically stop when the EON
programme is finished.
Notes on EON and timer
e When the timer is turned on while
receiving an EON programme, the station
set with the timer will not be received.
¢ When the timer is set and the unit is in
EON standby mode, pressing the EON
button while "EON Wait?" and "Push
EON KEY" is displayed after turning off
the system power, the unit continues
EON standby mode even when the power
is off, but the timer will not operate.
Notes on EON and the Function
Selectors
¢ When an EON programme is received
while playing tape or CD, the function is
automatically switched to tuner mode and
the playback of the current source is
stopped. When the EON reception is
finished, the system returns to the
playback of the previously selected
source. (CD playback resumes from the
point where playback was interrupted
when EON started.)
¢ When the function is switched while
receiving an EON programme, it will not
return to the former setting nor start
playback after the broadcast is finished.
Searching for RDS stations
by Programme Type
You can search through all the stored RDS
stations for a specific type of programme
currently being broadcast.
Note
If you want to tune in traffic, news, or
information programmes as they occur on
the RDS network, use the EON feature (see
"Information Programmes (EON)"). The
EON feature allows the unit to
automatically switch to these programmes
as they begin broadcasting.