Cisco ASR 9000 Series Посібник з конфігурації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Мережеве обладнання Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 сторінок. Line card
Також для Cisco ASR 9000 Series: Налаштування мережевих параметрів (26 сторінок), Посібник з конфігурації (46 сторінок), Посібник (24 сторінок), Налаштування (46 сторінок), Посібник (44 сторінок), Короткий довідник (7 сторінок)
Друкувати сторінку
Release 3.4.1
Release 3.5.0
Release 3.7.0
Release 3.8.0
Release 3.9.0
Release 4.0.0
Release 4.0.0
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
500
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
This feature was introduced on the Cisco CRS-1 Router.
Support was added on the Cisco CRS-1 Router for the following hardware:
Cisco CRS-1 SIP-800
•
•
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Multilink PPP was supported on serial interfaces on the
Cisco XR 12000 Series Router.
Support was added on the Cisco XR 12000 Series Router for the following
SPAs:
•
Cisco 1-Port Channelized OC-12/DS0 SPA
•
Cisco 1-Port Channelized OC-48/STM-16 SPA
Support was added on the Cisco XR 12000 Series Router for the 1-Port
Channelized OC-48/DS3 Line Card.
Support was added on the Cisco XR 12000 Series Router for quality of
service (QoS) on Layer 2 subinterfaces and the following line cards:
•
Cisco 1-Port Channelized OC-12/DS0 Line Card
•
Cisco 4-Port Channelized OC-12/DS3 Line Card
Support for serial interfaces was added on the
Cisco ASR 9000 Series Router for the 2-Port Channelized OC-12c/DS0
SPA.
Support for the following features and SPAs was added on the
Cisco ASR 9000 Series Router:
•
Support for IPv4 multicast was added for serial interfaces. For more
information about multicast configuration on an interface, see the
Cisco ASR 9000 Series Aggregation Services Router Multicast
Configuration Guide.
IPHC was added on the Cisco 2-Port Channelized OC-12c/DS0 SPA.
•
Support for the Cisco 1-Port Channelized OC-48/STM-16 SPA was
•
introduced.
Support for fragmentation counters using the fragment-counter command
was added for the following SPAs:
Cisco 1-Port Channelized OC-3/STM-1 SPA
•
Cisco 4-Port Channelized T3/DS0 SPA
•
Cisco 8-Port Channelized T1/E1 SPA
•
OL-26061-03