Cisco ATA 191 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Cisco ATA 191. Cisco ATA 191 30 сторінок. Analog telephone adapter
Також для Cisco ATA 191: Посібник користувача (30 сторінок), Посібник з адміністрування (4 сторінок), Посібник користувача (10 сторінок), Початок роботи (8 сторінок), Посібник (10 сторінок), Посібник із швидкого старту (13 сторінок), Посібник з налаштування (6 сторінок), Посібник користувача (40 сторінок)

Get Started with Your New ATA

Item

Phone 1 LED

Phone 2 LED

Problem Report Tool (PRT) Button

Problem Report Tool (PRT) LED

ATA 191 Back Panel

The back panel of your ATA has several ports used to connect your device and to power it. The back panel

also has the reset button for resetting the device to the factory settings.

Figure 2: ATA 191 Back Panel

The following table describes the ports that are located on the back panel of your ATA.

Description

Steady green: On hook.

Slow flashing green: Off hook.

Fast flashing green three times, then repeats: The analog device failed

to register.

Fast flashing green: A factory reset is performed successfully.

Off: The port is not configured.

Press this button to create a problem report using the Problem Report

Tool.

Note

Flashing amber: The PRT is preparing the data for the problem report.

Fast Flashing amber: The PRT is sending the problem report log to

the PRT server.

Solid green for five seconds, then off: The PRT report was sent

successfully.

Fast flashing green: A factory reset is performed successfully.

Flashing red: The PRT report failed. Press the PRT button to turn the

LED off. Once it is off, another press triggers a new PRT report.

Cisco ATA 191 Analog Telephone Adapter User Guide for Cisco Unified Communications Manager

This is not a power button. When you press this button, a

problem report is generated and uploaded to a server for

the system administrator.

ATA 191 Back Panel