Cisco Catalyst 3560-E Series Посібник для початківців - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для початківців для Мережеве обладнання Cisco Catalyst 3560-E Series. Cisco Catalyst 3560-E Series 25 сторінок. Switches and power supply modules
Також для Cisco Catalyst 3560-E Series: Інформаційний бюлетень про продукцію (5 сторінок), Питання та відповіді (3 сторінок), Бюлетень підтримки продукту (2 сторінок), Бюлетень підтримки продукту (5 сторінок), Вказівки щодо встановлення (20 сторінок)

• Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent

lighting fixtures. Make sure the cabling is safely away from other devices that might damage the

cables.

• Airflow around the switch and through the vents is unrestricted.

• Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed

or multirack assembly, the temperature around it might be greater than normal room temperature.

• For copper connections on Ethernet ports, cable lengths from the switch to connected devices can

be up to 328 feet (100 meters).

• For cable lengths for X2 transceiver modules and SFP-module connections, see the hardware

installation guide on Cisco.com and the documentation that shipped with the module.

Installation Warning Statements

This section includes the basic installation warning statements. Translations of these warning

statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3750-E and

Catalyst 3560-E Switch guide.

Warning

To prevent the switch from overheating, do not operate it in an area that exceeds the

maximum recommended ambient temperature of 113°F (45°C). To prevent airflow

restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings.

Statement 17B

Warning

Do not reach into a vacant slot or chassis while you install or remove a module or a fan.

Exposed circuitry could constitute an energy hazard. Statement 206