- ページ 12

ネットワーク・ハードウェア Cisco Catalyst 3560-E SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 3560-E Series 25 ページ。 Switches and power supply modules
Cisco Catalyst 3560-E Series にも：製品情報 (5 ページ), 質問と回答 (3 ページ), 製品サポート速報 (2 ページ), 製品サポート速報 (5 ページ), インストレーション・ノート (20 ページ)

ページを印刷する

• Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent

lighting fixtures. Make sure the cabling is safely away from other devices that might damage the

cables.

• Airflow around the switch and through the vents is unrestricted.

• Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed

or multirack assembly, the temperature around it might be greater than normal room temperature.

• For copper connections on Ethernet ports, cable lengths from the switch to connected devices can

be up to 328 feet (100 meters).

• For cable lengths for X2 transceiver modules and SFP-module connections, see the hardware

installation guide on Cisco.com and the documentation that shipped with the module.

Installation Warning Statements

This section includes the basic installation warning statements. Translations of these warning

statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3750-E and

Catalyst 3560-E Switch guide.

Warning

To prevent the switch from overheating, do not operate it in an area that exceeds the

maximum recommended ambient temperature of 113°F (45°C). To prevent airflow

restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings.

Statement 17B

Warning

Do not reach into a vacant slot or chassis while you install or remove a module or a fan.

Exposed circuitry could constitute an energy hazard. Statement 206