- ページ 11

ネットワーク・ハードウェア Cisco Catalyst 3560-E SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 3560-E Series 25 ページ。 Switches and power supply modules
Cisco Catalyst 3560-E Series にも：製品情報 (5 ページ), 質問と回答 (3 ページ), 製品サポート速報 (2 ページ), 製品サポート速報 (5 ページ), インストレーション・ノート (20 ページ)

ページを印刷する

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management

Solution (SNMS) and HP OpenView to configure and manage the switch. You also can manage it

from an SNMP-compatible workstation that is running platforms such as HP OpenView or

SunNet Manager.

The Cisco IE2100 Series Configuration Registrar is a network management device that works with

embedded Cisco Networking Services agents in the switch software. You can use IE2100 to automate

initial configurations and configuration updates on the switch.

See the "Accessing Help Online" section on page 21 for a list of supporting documentation.

Rack-Mounting

This section covers basic 19-inch rack-mounting and switch port connections. As an example, all the

illustrations show the Catalyst 3560E-48 PoE switch. You can install and connect other

Catalyst 3560-E switches as shown in these illustrations. For additional installation and cabling

information, see the hardware installation guide on Cisco.com.

Equipment That You Supply

You need a Phillips screwdriver to rack-mount the switch.

Before You Begin

Before installing the switch, verify that these guidelines are met:

• Clearance to front and rear panels is such that

Front-panel indicators can be easily read.

–

Access to ports is sufficient for unrestricted cabling.

–

• For switches that support the RPS 2300, confirm that you have access to the switch rear panel to

connect the RPS 2300. If you do not have access to the rear panel, you should cable the switches

before you rack-mount them.

• For switches with the optional 1150-W power supply module (model C3K-PWR-1150WAC), first

rack-mount the switch before installing the power supply module.

• AC power cord can reach from the AC power outlet to the connector on the switch rear panel.