Argo-Hytos TSE3-D Інструкція з експлуатації Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Перемикач Argo-Hytos TSE3-D. Argo-Hytos TSE3-D 12 сторінок. Electronic pressure switch

Друкувати сторінку

6 Electrical connection

The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment must be adhered to.
Voltage supply according to EN 50178, SELV, PELV.
For the scope of validity cULus:
The device shall be supplied from an isolating transformer having a secondary Listed fuse rated either
a) max 5 amps for voltages 0 ~ 20 Vrms (0 ~ 28.3 Vp) or
b) 100/Vp for voltages of 20 ~ 30 Vrms (28.3 ~ 42.4 Vp).
The device shall be connected only by using any Listed (CYJV/7) or R/C (CYJV2/8) cord in respect of Condition of Acceptability, having suitable
ratings.
► Disconnect power.
► Connect the unit as follows:
Core colours
BK
black
BN
brown
BU
blue
WH
white
2 x positive switching
1
2
4
3
2: OUT2
4: OUT1
1 x positive switching / 1 x analogue
1
2
4
3
2: OUT2
4: OUT1

7 Operating and display elements

More information at www.argo-hytos.com
Subject to change · TSE3-D_9193_1en_09/2019
2
1
3
4
OUT1: switching output or IO-Link
OUT2: switching outputs or analogue output
Colours to DIN EN 60947-5-2
Example circuit
BN
L+
WH
BK
BU
L-
BN
L+
WH
BK
BU
L-
1 to 8: indicator LEDs
LED 1
LED 8
LEDs 2 - 7
9: Enter button [●]
- Selection of the parameters and acknowledgement of the parameter values.
10 to 11: Arrow keys up [▲] and down [▼]
- Setting of the parameter values (scrolling by holding pressed; incremental by pressing once).
12: Alphanumeric display, 4 digits
- Display of the current system pressure.
- Indication of the parameters and parameter values.
BN
1
2
WH
4
BK
3
BU
2 x negative switching
BN
1
2
WH
4
BK
3
BU
2: OUT2
4: OUT1
1 x negative switching / 1 x analogue
BN
1
2
WH
4
BK
3
BU
2: OUT2
4: OUT1
Switching status OUT1 (lights when output 1 is switched).
Switching status OUT2 (lights when output 2 is switched).
System pressure in the indicated unit of measurement
(pin connection is device-specific).
L+
OUT2
OUT1
L-
L+
L-
L+
L-
Strana 4