Digitrax DH123PS Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Конвертер мультимедіа Digitrax DH123PS. Digitrax DH123PS 4 сторінки. Mobile decoder
Друкувати сторінку
Installation Information
See the Digitrax Decoder Manual for complete decoder test procedures, installa-
tion instructions, programming and technical information. Digitrax manuals and
instructions are updated periodically. Please visit www.digitrax.com for the lat-
est versions, technical updates and additional locomotive-specific installations.
Installation Instructions
1. Carefully remove the locomotive's shell from the frame. Notice the orienta-
tion of the shell to the frame so that you can reinstall correctly.
2. The DH123D uses the DHWHP Digitrax Easy Connect 9 Pin Harness
System which consists of a 1.0" harness that has a Digitrax 9-pin plug on
one end and a DCC medium plug on the other. Remove the jumper plugs
from the DCC medium socket on the factory light board and plug in the
DCC plug end of the harness.
3. Plug the 9 Pin plug on the DHWHP harness into the socket on the decoder.
The plug is notched to fit easily into the socket in only one orientation.
4. Replace the loco shell. You are now ready to run your locomotive. The
DH123D is factory programmed to address 03. You can easily customize
the address and other features. See section "Customizing Your Decoder"
that follows.
Figure 1. DH123PS Wiring Diagram
Installation Notes:
1. Do not exceed the decoder's 500mA total function output rating.
2. To use a function output with an inductive (coil) type load, see the Digitrax Decoder Manual
for more information to avoid damage to the decoder.
3. See the Digitrax Decoder Manual for full details of wiring 12-16V lamps, 1.5V lamps, and
LEDs. Lamps that draw more than 80 mA when running require a 22 ohm 1/4 watt resistor in
series with the directional light function lead to protect the decoder.
©2011 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
NOTE: The Violet and Green leads of the harness are
www.digitrax.com
Warning: to prevent decoder
damage, be sure the motor
brushes are properly isolat-
ed before applying power.
not used by this decoder.
2