Cisco Physical Access 1125 Appliance Посібник користувача - Сторінка 25
Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42 сторінки.
Друкувати сторінку
Chapter 3
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-5
The following items are shown in
1
2
Installing the Chassis in the Rack
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an appropriate lifting
Caution
device. A fully loaded Cisco PAM appliance weighs approximately 13.9 kg (30.6 lbs.).
To mount the chassis on the rack, perform the following procedure:
Locate one person at the front of the rack and one at the rear.
Step 1
Step 2
Position the chassis so that the L brackets (see item 1 in
chassis mounting brackets (see item 2 in
While one person supports the weight of the chassis, the other person must adjust the L brackets to fit
Step 3
tightly into the chassis brackets (see item 3 in
OL-20929-01
Attaching an L Bracket to a Center Post
2
1
3
L bracket
Rack screw
Figure
3-5:
3
Front side of right center post
Figure 3-6 on page
Figure 3-6 on page
Figure 3-6 on page
Cisco Physical Access 1125 Appliance User Guide
Rack Mounting the Cisco PAM 1125 Appliance
3-8) are inserted into the
3-8).
3-8).
3-7