Cisco Physical Access 1125 Appliance Посібник користувача - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42 сторінки.
Друкувати сторінку
Chapter 3
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-7
The following items are shown in
1
Front-Mounting the 1125 Appliance on a Two-Post Rack
The rack mount kit for the Cisco PAM provides the option for mounting the system in a two post
Warning
front-mount-only configuration. However, this option is not recommended for use in most rack
systems. If you wish to use a front-mount-only configuration, it is strongly recommended that you
verify with your rack vendor that your specific rack is designed to support the excessive weight and
stresses that this mounting configuration imposes on the rack. If the rack is not designed for this type
of load, you may experience structural failure of the rack. Rather, you should use a four-post or a
two-post mid-mount configuration, when possible.
This section contains the following topics:
•
•
•
OL-20929-01
Installing the Chassis in the Rack
C is
c o
P h
y s
ic a
l A
c c
Chassis bracket in mid-mount
position
Attaching the Brackets to the Chassis, page 3-10
Attaching the L Brackets to the Rack Posts, page 3-11
Installing the Chassis in the Rack, page 3-12
e s
s M
a n
a g
e r
2
1
Figure
3-7:
2
Rack screws
Cisco Physical Access 1125 Appliance User Guide
Rack Mounting the Cisco PAM 1125 Appliance
3-9