Cisco TelePresenceMCU 5300 Series Початок роботи - Сторінка 10
Переглянути онлайн або завантажити pdf Початок роботи для Сервер Cisco TelePresenceMCU 5300 Series. Cisco TelePresenceMCU 5300 Series 20 сторінок. Multipoint control units
Друкувати сторінку
Configuring the MCU
Step one: Log in to the MCU
All administration of the MCU is performed via the web interface.
To log in to the web interface of the MCU:
1
Use your browser to navigate to the IP address or host name of the MCU (to
discover the IP address, refer to the previous section).
2
Click
Log in
information page
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, click
information
required user information.
Step two: Using an H.323 gatekeeper or SIP registrar (optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for
participants to call in to a conference.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to
call in to a conference.
To configure the MCU to use an H.323 gatekeeper:
1
In the web interface of the MCU, go to
2
Enable
H.323 gatekeeper usage
the online help for further assistance.
3
Click
Apply changes
To configure the MCU to use a SIP registrar:
1
In the web interface, go to
2
Enable
SIP registrar usage
online help for further assistance.
3
Click
Apply changes
Before you configure the MCU to use, and register conferences to, a SIP
i
registrar, you must set up the MCU and its conferences on that SIP
registrar.
and enter the user name
is displayed.
page or go to
.
Settings > SIP
and configure the settings you require, using the
.
with no password. The
admin
Change password
, click the
Users
admin
Settings > H.323
and configure the settings you require, using
.
Configuring the MCU
Login
on the
Login
link, and provide the
.
10