Cisco UCS B460 M4 Вказівки щодо встановлення та обслуговування - Сторінка 42

Переглянути онлайн або завантажити pdf Вказівки щодо встановлення та обслуговування для Сервер Cisco UCS B460 M4. Cisco UCS B460 M4 50 сторінок. Blade server
Також для Cisco UCS B460 M4: Технічний паспорт (7 сторінок), Вказівки щодо встановлення та обслуговування (46 сторінок), Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (5 сторінок)

Installing and Enabling a Trusted Platform Module

Figure 20: Installing an Adapter Card

Position the adapter board connector above the motherboard connector and align the two adapter captive

screws to the standoff posts (see callout 1) on the motherboard.

Step 2

Firmly press the adapter connector into the motherboard connector (see callout 2).

Step 3

Tighten the two captive screws (see callout 3).

Tip

The Trusted Platform Module (TPM) is a component that can securely store artifacts used to authenticate the

server. These artifacts can include passwords, certificates, or encryption keys. A TPM can also be used to

store platform measurements that help ensure that the platform remains trustworthy. Authentication (ensuring

that the platform can prove that it is what it claims to be) and attestation (a process helping to prove that a

platform is trustworthy and has not been breached) are necessary steps to ensure safer computing in all

environments. It is a requirement for the Intel Trusted Execution Technology (TXT) security feature, which

must be enabled in the BIOS settings for a server equipped with a TPM.

Note

TPM installation is supported after-factory. However, a TPM installs with a one-way screw and cannot be

replaced or moved to another server. If a server with a TPM is returned, the replacement server must be ordered

with a new TPM.

Procedure

Step 1

Install the TPM hardware.

a) Power off, decommission, and remove the blade server from the chassis.

b) Remove the blade server cover.

c) Install the TPM to the TPM socket on the server motherboard and secure it using the one-way screw that

is provided. See the figure below for the location of the TPM socket.

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs

Removing an adapter card is the reverse of installing it. You might find it helpful when removing

the connector from the motherboard to gently rock the board along the length of the connector until

it loosens.

Servicing the Blade Server