Cisco 3G MicroCell Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Шлюз Cisco 3G MicroCell. Cisco 3G MicroCell 20 сторінок. At&t wireless network gps signal extender
Також для Cisco 3G MicroCell: Посібник користувача (20 сторінок), Посібник із швидкого старту (8 сторінок), Посібник користувача (20 сторінок)

Step 1:In-Store Activation

At the time of purchase at an ATMC Wireless store, your 3G MicroCell should

have been activated by a wireless representative. If you did not go through the

3G MicroCell activation process at time of purchase, you must take it to an ATMC

Wireless location to have it activated before setup and use can occur.

Note: As an added benefit, when placing a 911 call while connected to your 3G

MicroCell, the full location address you provide in your activation will be sent to local

emergency responders. A built-in Global Positioning System (GPS) feature helps deliver

this functionality.

Write down your 3G MicroCell's

serial number

it for future reference or

reactivation.

How you configure your 3G MicroCell is dependent on what equipment you currently use to connect to the Internet.

•Ifyouhaveeitheragateway

•Ifyouonlyhaveamodem

•Ifyouhaveamodem,andaWi-Firouterandwanttoprioritizeyour3GMicroCellconnectionbecauseotherInternet

use impacts the 3G MicroCell's performance, follow our

If you currently use a

USB cable

You have 2 cabling alternatives:

Alternative A: Remove the USB cable and install Ethernet cables according to Option A, B, or C as described above.

Note: This option requires a second Ethernet cable which is not included in your AT&T 3G MicroCell™ box.

Alternative B: Obtain USB-to-RJ45 adapters (not shown) and install one with the yellow Ethernet cable and the other with

your USB cable and then select from Option A, B, or C as described above.

• PlaceyourMicroCellwithin3feetofawindow,ifpossible.

• MakesureyourMicroCellisatleast1footawayfromyourgatewayormodemandWi-Firouter.

• RefertoFAQ1.3onpage16foradditionaldetailsonproductplacement.

as you will need

Serial # (S/N) :

modem and Wi-Fi

router, follow

attached directly to your computer, follow

to connect your modem and computer you will no longer be able to do so.

OPTION A on page

OPTION B on page

Priority Mode Configuration

10.

which is

OPTION C on page

11.