Cisco ASR 9000 Series Посібник з конфігурації - Сторінка 38
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Шлюз Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 сторінок. Line card
Також для Cisco ASR 9000 Series: Налаштування мережевих параметрів (26 сторінок), Посібник з конфігурації (50 сторінок), Посібник (24 сторінок), Налаштування (46 сторінок), Посібник (44 сторінок), Короткий довідник (7 сторінок)
Друкувати сторінку
How to Configure Clear Channel T3/E3 Controllers and Channelized T1/E1 Controllers
2.
3.
4.
5.
6.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
controller {t1 | e1} interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# controller t1
0/1/1/0/1/1
Step 3
lnm {major-warning | remove}[clear |
set][line-code-violation lcv-value
[path-code-violation pcv-value]][duration
seconds]
Example:
RP/0/RSP0/CPU0:router(config-t1)# lnm
major-warning
Step 4
lnm minor-warning [clear |
set][line-code-violation lcv-value
[path-code-violation pcv-value]][duration
seconds]
Example:
RP/0/RSP0/CPU0:router(config-t1)# lnm
minor-warning
Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide
482
Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router
controller {t1 | e1} interface-path-id
lnm {major-warning | remove} [clear | set][line-code-violation lcv-value [path-code-violation
pcv-value]][duration seconds]
lnm minor-warning [clear | set][line-code-violation lcv-value [path-code-violation
pcv-value]][duration seconds]
lnm syslog
end
or
commit
Enters global configuration mode.
Enters T1 or E1 configuration mode.
(Optional) Enables link noise monitoring and specifies
thresholds for noise errors on T1/E1 links that are used to
signal major warning events or link removal and recovery
from those events.
The default values for both set and clear thresholds are:
For T1 links—line-code-violation is 1544,
•
path-code-violation is 320, and duration is 10.
For E1 links—line-code-violation is 2048,
•
path-code-violation is 831, and duration is 10.
(Optional) Enables link noise monitoring and specifies
thresholds for noise errors on T1/E1 links that are used to
signal minor warning events and recovery from those
events.
The default values for both set and clear thresholds are:
For T1 links—line-code-violation is 154,
•
path-code-violation is 145, and duration is 10.
•
For E1 links—line-code-violation is 205,
path-code-violation is 205, and duration is 10.
OL-32684-01