Cisco T3 Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Шлюз Cisco T3. Cisco T3 9 сторінок. Network modules
Також для Cisco T3: Посібник з підключення (4 сторінок)
Figure 4-6 Remove the DFC from the Cisco AS5350
Figure 4-7 Remove the DFC from the Cisco AS5400
Step 10 After you remove the DFC from the chassis, set it aside on an ESD-preventive mat.
Step 11 If a DFC slot on the carrier card is to remain empty, install a blank cover over the open
DFC slot to ensure proper airflow inside the chassis. (See
Figure
4-8.)
Figure 4-8 Blank DFC Cover
Installing the T3 DFC
Warning Do not work on the system or connect or disconnect cables during periods of lightning
activity. To see translations of the warnings that appear in this publication, refer to the
Regulatory Compliance and Safety Information document that accompanied this device.