DIGMESA FC-PRO Посібник з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Монітор DIGMESA FC-PRO. DIGMESA FC-PRO 20 сторінок.

11. P/L pulses per litre, manual

Select Day counter or Total counter and keep the Mode

button pressed for 5 seconds.

If the unit is protected by a code, you will be requested

to enter this code (Code, Chapter 14).

SYSTEM LED is illuminated.

ALARm is shown on the display.

In Setting mode, if no button is pressed for 30 seconds,

the display goes back to the Day counter.

Press the Up button once to switch to P/L setting (pulses

per litre, manual).

P/L is shown on the display.

Now, press the Mode button again to switch to the Set-

ting value.

Adjust the pul/l value of the flow sensor connected. Use

the Down/Up buttons to change the value and the Mode

button to switch to the next digit.

For example, a value of 1'000 pulses per litre:

Press Mode button 3x, Up button 1x and then Mode

button 2x. P/L is shown on the display.

Press the Up button once briefly to switch to AUTO P/L

setting (pulses per litre, automatic). Or press the Mode

button for 5 seconds to go back to the Day counter.

FC PRO ENG

Page 12