Digoo DG-TH2048 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Метеостанція Digoo DG-TH2048. Digoo DG-TH2048 4 сторінки.

BATTERY ASSEMBLING

Take out the bracket and open the battery compartment cover. Insert 2xAAA batteries

according to the correct polarity showed in the compartment.

After inserting the batteries, LCD will fully display for 3 seconds and the buzzer will so-

und BIBIBIBI, and then enter into normal display.

Default on display:

Temperature in ℃ (℃/℉switchable)

Temperature values indicates current room temperature, not dew point temperature

BUTTON FUNCTIONS

[SET/DEW POINT] BUTTON

In normal mode, press [SET/DEW POINT] to check current room temperature and

dew point temperature;

In normal mode, hold pressing [SET/DEW POINT] for three seconds to enter hum-

idity alert values setting;

In humidity alarm setting mode, press [SET/DEW POINT] to switch between high

humidity alert and low humidity alert. The setting order is high humidity alert values

—low humidity alert values--exit.

[ON/OFF] BUTTON

In normal mode, press [ON/OFF] button to turn on/off humidity alert alarm.

[C/F/▼] BUTTON

In normal mode, press [C/F/▼]to switch between ℃ and ℉;

In normal mode, press and hold [C/F/▼] button for 3 seconds to enter MOLD AL-

ERT & SCHIMMEL-GEFAHR ALERT setting. Press [C/F/▼] or [MAX/MIN▲] to

change the setting. The mould alert humidity values has 4 alternatives: 60%, 65%,

70%, 75%;

In MOLD ALERT & SCHIMMEL-GEFAHR setting mode, press and hold [C/F/▼] for

3 seconds to save the values and exit mould alert setting mode.

[MAX/MIN▲] BUTTON

Press [MAX/MIN▲] to check the maximum and minimum temperature & humidity

data;

Hold pressing [MAX/MIN▲] for 3 seconds to clear the humidity and temperature

values and re-register the data.