TomTom LINK 510 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для GPS TomTom LINK 510. TomTom LINK 510 35 сторінок. Vehicle tracking device
Також для TomTom LINK 510: Посібник користувача (37 сторінок), Посібник з монтажу (16 сторінок)

Друкувати сторінку

Updating the LINK 510

We recommend updating the firmware on your LINK 510. You can do this by using the

Updat-

ing the

LINK

510

Firmware-Update Tool and a Microsoft Windows® computer. A connection to the Internet

or TomTom WEBFLEET is not required.

System Requirements

Before you can use the LINK 510 Firmware-Update Tool, you need the following:

• The TomTom LINK 510 Service Set.

• A Microsoft Windows computer.

• The latest LINK 510 Firmware-Update Tool (firmware is embedded).

• The USB driver for TomTom LINK 510 devices.

Preparations

1. Install the USB driver.

This is required to establish a connection between your computer and your LINK 510

using the USB cable.

You can download the USB driver from the Partner Portal. Install the driver on your

computer by double clicking the .exe file and following the instructions.

2. Install the latest Firmware-Update Tool version.

You can download the latest Firmware-Update Tool from the Partner Portal under

Software and Firmware. You must be logged in to the Partner Portal to download the

Tool. The downloadable ZIP file contains the tool with the firmware update file

embedded. Unzip the downloaded file to your local hard disk.

Updating the firmware on your LINK 510

To update the firmware on your LINK 510 using the Firmware Update Tool, do the

following:

1. Connect your LINK 510 to a Microsoft Windows® computer using USB.

The first time you connect a LINK 510 to your computer's USB port, a pop-up window

tells you about the installation of the hardware. Follow the instructions and select

automatic installation.

A virtual COM port named TomTom LINK followed by a port number is assigned.

To find out the port number, do the following: Open the Windows Control Panel.

Select the Hardware tab. Select Device Manager. Open the list for Ports (COM & LPT).

2. Start the Firmware-Update Tool by double clicking on the .exe file.

On a computer with Microsoft Windows® Vista or Windows® 7, you must run the tool