TomTom LINK 510 Посібник користувача - Сторінка 22

Переглянути онлайн або завантажити pdf Посібник користувача для GPS TomTom LINK 510. TomTom LINK 510 37 сторінок. Vehicle tracking device
Також для TomTom LINK 510: Посібник з монтажу (35 сторінок), Посібник з монтажу (16 сторінок)

Друкувати сторінку

Connecting to PRO and WEBFLEET

Connect your PRO Driver Terminal to your LINK 510 to fully enjoy the benefits of your WEBFLEET

solution.

To use a Driver Terminal in combination with the LINK 510 a corresponding WEBFLEET

subscription is required.

When you first switch on your Driver Terminal, you are asked to connect it with the LINK 510

installed in your vehicle. You can do this immediately or at any time later by doing the following:

1. Make sure that the LINK 510 is connected to power and has a mobile network connection.

2. Switch on your PRO Driver Terminal.

3. Tap the Main Menu button in the lower left corner.

Note: If you have a PRO 51xx/71xx tap the screen to bring up the Main Menu.

4. Tap WEBFLEET.

Note: If you have a PRO 51xx/71xx tap WORK.

You are asked to start the activation process. After you have started the activation process

your Driver Terminal starts searching for Bluetooth devices.

If your Driver Terminal finds more than one Bluetooth device, it shows a list of the available

devices. Continue with step 5.

If your Driver Terminal finds only one LINK 510, continue with step 6.

5. Select your LINK 510 from the list.

The name starts with LINK followed by the serial number of your LINK 510 or the licence plate

number of your vehicle. You can find the serial number on the outside of your LINK 510.

6. Enter the Activation Code, which you can find in your WEBFLEET contract confirmation.

Select the appropriate subscription from the list, if there are several subscriptions to choose

from. Enter a name for your LINK 510 if you are asked to do so.

Note: If you have a PRO 51xx/71xx you are asked to enter the licence plate number of the

vehicle and to select the appropriate vehicle type. If you select Truck or Bus, you have to enter

your vehicle dimensions.

If you have properly connected the two devices, you receive a welcome message from WEBFLEET

confirming the activation. In future the connection is established automatically.

To check the connection status between the two devices, bring up the Main Menu. Then tap

Settings, then tap Help and select WEBFLEET connection status from the list.

Note: If you have a PRO 51xx/71xx, check the connection status between the two devices by

tapping WORK in the Main Menu, then tap Connection status.