Crow FW2-SIREN2CP-8/9F Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з монтажу для Система безпеки Crow FW2-SIREN2CP-8/9F. Crow FW2-SIREN2CP-8/9F 19 сторінок. Siren system
Друкувати сторінку
Installation Instructions
Installing the Transceiver
1. Choose a central location for the installation of the Transceiver to insure radio
2.
3. Place the unit on the installation surface and mark out the four screw holes.
4. Use a 6 mm bit to drill the holes.
Figure 5: Transceiver Unit
5. Power‐Off the control panel.
6. Wired the Transceiver to the Control Panel.
7. Power‐On the Control Panel.
8. Check the functionality of the system before installing the Siren Units.
coverage to all the Siren Units.
Open the Screw (See Figure‐6) and open the cover.
Figure 6: Transceiver Installation
11