Crow FW2-SIREN2CP-8/9F 설치 매뉴얼 - 페이지 13
{카테고리_이름} Crow FW2-SIREN2CP-8/9F에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crow FW2-SIREN2CP-8/9F 19 페이지. Siren system
페이지 인쇄
Installation Instructions
Installing the Transceiver
1. Choose a central location for the installation of the Transceiver to insure radio
2.
3. Place the unit on the installation surface and mark out the four screw holes.
4. Use a 6 mm bit to drill the holes.
Figure 5: Transceiver Unit
5. Power‐Off the control panel.
6. Wired the Transceiver to the Control Panel.
7. Power‐On the Control Panel.
8. Check the functionality of the system before installing the Siren Units.
coverage to all the Siren Units.
Open the Screw (See Figure‐6) and open the cover.
Figure 6: Transceiver Installation
11