Epson EMP Monitor Посібник з експлуатації - Сторінка 30
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Epson EMP Monitor. Epson EMP Monitor 37 сторінок. Emp monitor for projectors
Також для Epson EMP Monitor: Посібник з експлуатації (11 сторінок), Посібник з експлуатації (12 сторінок), Посібник користувача (42 сторінок), Посібник з експлуатації (34 сторінок), Посібник з експлуатації (14 сторінок)
Друкувати сторінку
Using the control functions
The line colors in the Timers list have the following meanings:
Current day's timer setting
When some of the projectors in the group have timer setting enabled
and others have it disabled for the current day's timer setting
When the current day's timer setting is a disabled setting
Timer setting for a day other than the current day
The details that can be checked and operations that can be carried out
at this time are given below.
Selects a group or projector to check the status of.
Projectors
When a group is selected, the timer setting statuses for all
projectors in that group are displayed.
Shows the current day in a red box.
Date
Days for which timer settings have been made are shown in bold.
Click
or
next month.
Shows a list of the timer settings.
Timers
Switches the timer settings that have been selected from the
Enabled/
timer list between enabled and disabled.
disabled
Add
Registers new timer settings. s "Procedures for new timer
settings"
p.30
Edit
Lets you change the timer settings that have been selected from
the timer list. If a group has been selected for status checking,
the settings cannot be changed.
Lets you delete timer settings that have been selected from the
Delete
timer list.
to switch to the calendar for the previous or
Procedures for new timer settings
Procedure
A
Click "Add" on the timer setting window. The following
window is displayed and the new timer settings are applied.
At Operation, you can carry out the operations of turning the
power on and off and switching the input sources, similarly for
the control buttons on the main window. If you set the input
source switching, the projector's power will turn on at the timer
start time even if it is not on at the time. Because of this, it is
not necessary to make two separate timer settings for turning the
power on and switching the input source.
B
After completing the timer settings, click "OK".
The timer settings that have been made will be registered and
they can be checked in the displayed timer list.
You can enable and disable all of the timer settings that have been
q
registered. Select Timer - Enable or Disable from the Tool menu.
30