MSI 610BF Посібник - Сторінка 34

Переглянути онлайн або завантажити pdf Посібник для Материнська плата MSI 610BF. MSI 610BF 45 сторінок.

When a password has been enabled, you will be prompted to enter it every time you try to enter

Setup.

This prevents an unauthorized person from changing any part of your system

configuration.

Additionally, when a password is enabled, you can also require the BIOS to request a

password every time your system is rebooted. This would prevent unauthorized use of your

computer.

You determine when the password is required within the BIOS Features Setup Menu and its

Security option (see Section 3). If the Security option is set to "System", the password will be

required both at boot and at entry to Setup. If set to "Setup", prompting only occurs when trying

to enter Setup.

3-11 Exit Selecting

Save & Exit Setup

Pressing <Enter> on this item asks for confirmation:

Save to CMOS and EXIT (Y/N)? Y

Pressing "Y" stores the selections made in the menus in CMOS – a special section of memory

that stays on after you turn your system off. The next time you boot your computer, the BIOS

configures your system according to the Setup selections stored in CMOS. After saving the

values the system is restarted again.

Exit Without Saving

Pressing <Enter> on this item asks for confirmation:

Quit without saving (Y/N)? Y

This allows you to exit Setup without storing in CMOS any change. The previous selections

remain in effect. This exits the Setup utility and restarts your computer.

During the Power On Self-Test (POST), if the BIOS detects an error requiring you to do

something to fix, it will either sound a beep code or display a message.

If a message is displayed, it will be accompanied by:

PRESS F1 TO CONTINUE, CTRL-ALT-ESC OR DEL TO ENTER SETUP



POST Beep

Currently there are two kinds of beep codes in BIOS. This code indicates that a video error has

occurred and the BIOS cannot initialize the video screen to display any additional information.

This beep code consists of a single long beep followed by two short beeps. The other code

indicates that your DRAM error has occurred. This beep code consists of a single long beep

repeatedly.



Error Messages

One or more of the following messages may be displayed if the BIOS detects an error during

the POST. This list includes messages for both the ISA and the EISA BIOS.



CMOS BATTERY HAS FAILED

CMOS battery is no longer functional. It should be replaced.



CMOS CHECKSUM ERROR