CROWNARCH VD51C Посібник з експлуатації та гарантійний талон - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з експлуатації та гарантійний талон для Дивись. CROWNARCH VD51C. CROWNARCH VD51C 8 сторінок.
Друкувати сторінку*The measurement time is indicated by the stopwatch hands that move independently of small second hand.
Before setting the time, check if the stopwatch 1/1 second, minute hands are in the "0"(12 o'clock) position.
* If the stopwatch is in use , press the button in the following order to reset it , and then ,
Check if the hands return to "0" position.
(for details , see "HOW TO USE THE STOPWATCH")
* If the stopwatch is counting :
* If the stopwatch is stopped :
* If the split time is displayed :
・If either of the stopwatch hands are not in the "0" position , reset them following the procedure below.
1. Put the crown out
to the second click.
*The stopwatch minute hand moves correspondingly with the stopwatch second hand.
*The hands move quickly if the respective buttons are kept pressed.
OPERATION
DISPLAY AND CROWN / BUTTON OPERATION
Minute hand
Hour hand
Second hand
Stopwatch minute hand
ADJUSTING THE STOPWATCH HAND POSITION
A
B
A
A
B
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
Stopwatch 1/1 second hand
A
A
A
A
2. Press button A or B to reset the stopwatch
1/1second , minute hands to "0" position.
* By pressing button A , set the stopwatch
1/1second hand.
* By pressing button B , set the stopwatch
minute hand.
Stopwatch 1/1 second hand
B
A
A
A
A
A
Stopwatch minute hand
Watch Setting & Operation
Button A
In stopwatch function
Start / Stop
Crown at normal position
Crown at second position
・Time setting
Crown at first position
・Date setting
Button B
In stopwatch function
Split / Reset
3. Push the crown back in to
the normal position
Version-01
Cal.VD51C
4