CROWNARCH VD51C Посібник з експлуатації та гарантійний талон - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації та гарантійний талон для Дивись. CROWNARCH VD51C. CROWNARCH VD51C 8 сторінок.
Друкувати сторінку1.Pull out the crown to
the first click.
*Do not set the date between 9:00 P.M. and 1:00 A.M.
Otherwise, the day may not change properly. If it is necessary to set the date during that time period, First change
the time to any time outside it, set the date and then reset the correct time.
・The measurement time is indicated by the stopwatch hands that move independently of the small second hands.
・The stopwatch can measure up to 12 hours in seconds.
(Standard measurement)
Ex)100m race (Press the buttons in the following order
START
OPERATION
TIME SETTING
2.Turn the crown clockwise
until the previous day's
date appears.
HOW TO USE THE STOPWATCH
3.Pull out the crown to the
second click when the
second hand is at the
12 O'clock position.
It will stop on the spot
and advance the hour
and minute hands by
turning the crown.
(Check that AM / PM
is set correctly)
*When the crown is at the
second click position.
Do not press any button.
Otherwise , the chronograph
hands will move.
⇒ A
⇒ B
A
A
A
A
A
A
STOP
A
A
A
(finish)
A
A
A
A
A
A
Watch Setting & Operation
Version-01
Cal.VD51C
4.Push the crown back in
to the normal position in
accordance with a time
signal.
RESET
(Reset to "0:00")
5