Croydex AP503122 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Інвалідний візок Croydex AP503122. Croydex AP503122 2 сторінки.

Fitting Instruction

1. Identify the most appropriate position for the shower chair ensuring the product is at a comfortable

height and distance for showering.

NOTE: When determining the most appropriate position for the shower chair ensure the legs are

fully extended, level and resting on the shower tray. The leg extension height can be adjusted by

removing the locking pins. Once the ideal height has been determined re-insert the locking pins to

secure the legs in position (See Fig.1).

2. The product can be folded upwards for more convenient storage so please ensure there is sufficient

space above the fixing position to allow for this.

3. Place the shower chair in the desired position on the wall and using the hole centres located on the wall

bracket as a template, mark the screw fixing positions on the wall surface ensuring the product is level.

ALL FIXING HOLES MUST BE USED (See Fig.1).

4. Drill the holes in the marked positions using a masonry drill. If the product is to be fitted onto a

ceramic tiled wall, a ceramic drill bit should be used.

5. Insert wall plugs (if applicable) flush to the surface of the wall. If fitting to a tiled surface, the wall plugs

should be inserted below the surface of the tile to avoid cracking.

6. Insert the screws through the holes located on the wall bracket and screw to the wall.

NOTE: Do not use countersink screws. Do not enlarge fixing holes. This can reduce the strength of

the frame and invalidate the safe working load stated.

7. Always check the shower chair is securely fastened to the wall before use.

To secure the pad to the seat

use the retainers provided.

If the seat pad is removed, fill the

holes with the plastic bungs provided.

Additional Information

Maximum safe working load for the shower seat is 158kg when fitted to solid brick, concrete block walls or

similarly strong materials offering appropriate support for the maximum safe working load.

NOTE: Lightweight thermal blocks, aerated hollow brickwork or prefabricated partition walls will

reduce the maximum safe working load of this product.

For details of the other items in the Croydex range please visit our website: www.croydex.com

Croydex Ltd, Central Way, Andover, Hants, SP10 5AW, UK

Tel: +44 (0) 1264 365881

Fax: +44 (0) 1264 356437

Fig.1

Make sure all fixing

holes are used.

Remove locking pins for

leg adjustment. Re-insert

once ideal leg height is

determined.

Lift collar on leg to level

the seat accordingly.

S&H 039 R01