Aeon Aeotec MultiSensor 6 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Aeon Aeotec MultiSensor 6. Aeon Aeotec MultiSensor 6 12 сторінок.

MultiSensor 6 can bring its intelligent readings to many locations of your home. Before deciding on a location, there are

some things you should first consider.

MultiSensor 6's motion sensor uses light and heat readings to determine motion; sudden light and heating changes can

impact the sensor's quality of motion readings. As such, your sensor should not be installed in areas of artificial

temperature change. Thus, when selecting a location, avoid placing it beside or near air conditioners, humidifiers, and

heaters, and avoid positioning it directly opposite a window or direct sunlight.

If your MultiSensor 6 will be powered by batteries, you should avoid installing it in a location where the temperature can drop

below 0°C / 32°F this is below the batteries' working point. Selecting a location for your sensor also depends on the layout

of any area that you want monitored. Whatever the room or area, please ensure that it fits with your sensor's effective

motion sensing range as described in the following diagrams. If installing MultiSensor 6 on a ceiling it can take

measurements within a 3 x 6 x 8 metre / 10 x 20 x 26 feet range:

If installing MultiSensor 6 in a corner where the wall meets the ceiling it can take measurements within a 2.5 x 3.5 x 5

metres / 8 x 11 x 15 feet range: