Pioneer DEH-4600BT Посібник з експлуатації - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer DEH-4600BT. Pioneer DEH-4600BT 37 сторінок. Cd rds receiver
Також для Pioneer DEH-4600BT: Посібник з монтажу (33 сторінок)

Друкувати сторінку

Pioneer DEH-4600BT Посібник з експлуатації

Using this unit

Turn M.C. to display ILLUMI and press

to select.

Turn M.C. to select the illumination

function.

Once selected, the following audio functions

can be adjusted.

KEY COLOUR (key section color setting)

You can select desired colors for the keys of this unit.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to BLUE)

! SCAN (cycle through a variety of colors auto-

matically)

! CUSTOM (customized illumination color)

DISP COLOUR (display section color setting)

You can select the desired colors for the display of

this unit.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to BLUE)

! SCAN (cycle through a variety of colors auto-

matically)

! CUSTOM (customized illumination color)

BOTH COLOUR (key and display color setting)

You can select the desired colors for the keys and dis-

play of this unit.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to BLUE)

! SCAN (cycle through a variety of colors auto-

matically)

PHONE COLOUR (phone color setting)

Selecting the key colors displayed when a call is re-

ceived

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

! FLASHING – The color selected from KEY

COLOUR flashes.

! FLASH MODE1 to FLASH MODE6 – The sys-

tem automatically cycles through all available

key colors for this unit. Select the desired

mode.

! OFF – No change in key color made when in-

coming calls are received.

ILLUMI FX (illumination effect mode)

In this mode, an illumination effect can be seen on

the display at certain times such as when the ACC

power is turned on/off or a CD is inserted/ejected.

1 Press M.C. to turn ILLUMI FX on or off.

! The illumination effect will activate when the ACC

power is turned on/off regardless of whether the

ILLUMI FX setting is on or off.

Note

When CUSTOM is selected, the customized color

saved is selected.

Customizing the illumination color

You can create custom illumination colors for

both KEY COLOUR and DISP COLOUR.

Press M.C. to display the main menu.

Turn M.C. to display ILLUMI and press

to select.

Turn M.C. to display KEY COLOUR or

DISP COLOUR. Press to select.

Press M.C. and hold until the customiz-

ing illumination color setting appears in

the display.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 20 for all three

of R (red), G (green), and B (blue) at the same

time.

# You can also perform the same operation on

other colors.

Note

You cannot create a custom illumination color

while SCAN is selected.

About MIXTRAX

Only for DEH-X5600BT

Section