Pioneer DEH-4600BT Посібник з експлуатації - Сторінка 22
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer DEH-4600BT. Pioneer DEH-4600BT 37 сторінок. Cd rds receiver
Також для Pioneer DEH-4600BT: Посібник з монтажу (33 сторінок)
Друкувати сторінку
Section
02
Using this unit
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing
you to experience your music as a nonstop
mix complete with visual effects.
Notes
! Depending on the file/song, sound effects
may not be available.
! Turn MIXTRAX off if the visual effects it pro-
duces have adverse effects on driving. Refer to
Operations using the MIXTRAX button on page
8.
MIXTRAX menu
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select MIXTRAX.
3
Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX func-
tions can be adjusted. The function is enabled
when MIXTRAX is on.
SHORT PLAYBCK (short playback mode)
You can select the length of the playback time.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—
2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)—
3.0 MIN (3.0 minutes)—OFF (off)
FLASH AREA (flash area)
You can select areas for flashing colors.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
KEY/DISPLAY (key and display)—KEY (key)—OFF
(off)
! When OFF is selected, the color set under ILLUMI
is used as the display color.
FLASH PATTERN (flash pattern)
22
En
The flashing color and MIXTRAX special effects dis-
play change with changes in the sound and bass le-
vels.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
! SOUND LEVEL 1 to SOUND LEVEL 6 – The
flash pattern changes according to the sound
level. Select a desired mode.
! LOW PASS 1 to LOW PASS 6 – The flash pat-
tern changes according to the bass level. Se-
lect a desired mode.
! RANDOM 1 – The flash pattern changes ran-
domly according to the sound level mode and
low pass mode.
! RANDOM 2 – The flash pattern changes ran-
domly according to the sound level mode.
! RANDOM 3 – The flash pattern changes ran-
domly according to the low pass mode.
DISPLAY FX (display effect)
The MIXTRAX special effects display can be turned on
or off.
1 Press M.C. to select the desired setting.
ON (MIXTRAX special effects display)—OFF (nor-
mal display)
CUT IN FX (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1 Press M.C. to select the desired setting.
ON (on)—OFF (off)