Pioneer Super Tuner IIID DEH-P6200BT Посібник з експлуатації - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer Super Tuner IIID DEH-P6200BT. Pioneer Super Tuner IIID DEH-P6200BT 49 сторінок. Cd receiver
Також для Pioneer Super Tuner IIID DEH-P6200BT: Посібник з монтажу (8 сторінок)
Друкувати сторінку
02
The playback speed of audiobook can be changed.
1 Press
to display the setting mode.
2 Turn
to select your favorite setting.
!
Playback at a speed faster than nor
mal
!
Playback at normal speed
!
Playback at a speed slower than nor
mal
3 Press
to confirm the selection.
(sound retriever)
! Refer to
Notes
! Operation is complete even if the menu is can
celled before being confirmed.
! Switching the control mode to
song playback. Operate the iPod to resume
playback.
! The following functions are still accessible
from the unit even if the control mode is set to
.
Volume
Fast forward/reverse
Track up/down
Pausing
Switching the text information
! When the control mode is set to
tions are limited as follows:
Only
and
available.
The browse function cannot be operated
from this unit.
Important
Be sure to park your vehicle and apply the park
ing brake when performing this operation.
16
En
(sound retriever) on page 14.
pauses
, opera
(control mode),
(pause)
(sound retriever) functions are
# You cannot operate this step during a call.
After selecting, perform the following proce
dures to set the function.
(connecting or disconnecting a cellular
phone from the device list)
1 Press
to display the setting mode.
2 Turn
to select the name of a device you want
to connect/disconnect.
3 Press
to connect/disconnect the selected
cellular phone.
If the connection is established, * is indicated on
the device name.
(deleting a cellular phone from the de
vice list)
1 Press
to display the setting mode.
2 Turn
to select the name of a device you want
to delete.
! Press and hold
and device name.
3 Press
to display
4 Press
to delete a cellular phone information
from the device list.
! While this function is in use, do not turn off the
engine.
(connecting a new cellular phone)
1 Press
to start searching.
! To cancel, press
2 Turn
to select a device from the device list.
! If the desired device is not displayed, select
.
3 Press and hold
to switch the BD address
and device name.
4 Press
to connect the selected cellular
phone.
! To complete the connection, check the device
name (
on your cellular phone.
! PIN code is set to
can change this code. Refer to
code input) on this page.
! If five devices are already paired,
is displayed and it is not possible to perform
this operation. In this case, delete a paired de
vice first.
to switch the BD address
.
while searching.
) and enter the link code
as the default. You
(PIN