Pioneer Super Tuner IIID DEH-P6200BT Посібник з експлуатації - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer Super Tuner IIID DEH-P6200BT. Pioneer Super Tuner IIID DEH-P6200BT 49 сторінок. Cd receiver
Також для Pioneer Super Tuner IIID DEH-P6200BT: Посібник з монтажу (8 сторінок)
Друкувати сторінку
02
(phone book)
! The phone book in your cellular phone will be
transferred automatically when the phone is con
nected to this unit.
! Depending on the cellular phone, the phone book
may not be transferred automatically. In this case,
operate your cellular phone to transfer the phone
book. The visibility of this unit should be on. Refer
to
(setting the visibility of this unit) on the
previous page.
1 Press
to display
list).
2 Turn
to select the first letter of the name you
are looking for.
! Press and hold
character type.
3 Press
to display a registered name list.
4 Turn
to select the name you are looking for.
5 Press
to display the phone number list.
6 Turn
to select a phone number you want to
call.
! When you find a phone number that you want
to store in memory, press and hold one of the
preset tuning buttons ( to ).
! Press one of preset buttons
desired preset number.
7 Press
to make a call.
(preset phone numbers)
1 Press
to display the setting mode.
2 Use
to select the desired preset number.
Turn to change the menu option. Press to select.
! You can also press one of the preset number
buttons
to
3 Press
to make a call.
(phone function)
You can set
menu. For details, refer to Function and operation on
this page.
Refer to
page.
18
En
(alphabetical
to select the desired
to
to recall the
to select a number.
and
from this
(phone function) on this
After selecting, perform the following proce
dures to set the function.
(automatic answering)
1 Press
to turn automatic answering on or off.
(ring tone select)
1 Press
to turn the ring tone on or off.
After selecting, perform the following proce
dures to set the audio function.
(fader/balance adjustment)
1 Press
to display the setting mode.
2 Press
to cycle between fader and balance.
3 Turn
to adjust the speaker balance.
Adjustment range (front/rear):
Adjustment range (left/right):
! Select
when only using two speakers.
! When the rear output setting is
cannot adjust front/rear speaker balance.
Refer to
fer setting) on page 20.
(equalizer recall)
1 Press
to display the setting mode.
2 Turn
to select an equalizer curve.
! When
is selected no adjustments are
made to the sound.
3 Press
to confirm the selection.
(equalizer adjustment)
to
to
, you
(rear output and subwoo