Pioneer GM-A3702 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Pioneer GM-A3702. Pioneer GM-A3702 33 сторінки. Bridgeable two-channel
Також для Pioneer GM-A3702: Посібник користувача (19 сторінок), Посібник користувача (33 сторінок), Посібник користувача (16 сторінок)

Connecting the units

1 Special red battery wire

RD-223 (sold separately)

After completing all other amplifier connec-

tions, finally connect the battery wire terminal

of the amplifier to the positive + battery term-

inal.

2 Ground wire (Black)

RD-223 (sold separately)

Connect to metal body or chassis.

3 Car stereo with RCA output jacks (sold sepa-

rately)

4 External output

5 Connecting wire with RCA pin plugs (sold se-

parately)

6 Speaker input terminal (use a connector in-

cluded)

Please see the following section for speaker

connection instructions. Refer to Connections

when using the speaker input wire.

7 RCA input jack

8 System remote control wire (sold separately)

Connect male terminal of this wire to the sys-

tem remote control terminal of the car stereo.

The female terminal can be connected to the

auto-antenna relay control terminal. If the car

stereo lacks a system remote control terminal,

connect the male terminal to the power term-

inal via the ignition switch.

9 Speaker output terminals

Please see the following section for speaker

connection instructions. Refer to Connecting

the speakers.

a Fuse 30 A × 2 (GM-A5702) / 25 A × 1 (GM-

A3702)

b Fuse (30 A) × 2

c Grommet

d Rear side

e Front side