Pioneer VSA-700 Посібник - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник для Підсилювач Pioneer VSA-700. Pioneer VSA-700 30 сторінок. Av digital surround amplifier

Друкувати сторінку

USE OF LEARNING FUNCTIONS

Prologue:

This programmable remote control unit is a remote control unit

with learning functions. It is capable of learning and memorizing

the remote control codes for operation of not only Pioneer audio

and video equipment but also for AV equipment of other

manufacturers. It is very convenient as all operations can be

made from a single remote control unit. It can only store the

remote control codes of infrared-type units. As almost all current

wireless remote control units use the infrared system, this

learning function allows for command code storage for most

audio and video components.

The programmable remote control can memorize control signals

for other system components. However, this does not mean

that the remote controls of other components are not needed

anymore, since they must be used at times of re-programming.

NOTE:

When programming, make sure that the equipment cannot

operate. Otherwise, loss of important tapes or sudden loud

noise output may occur.

Operation can be prevented by turning off the main power

supply of the equipment removing the pewer cord from the

AC outlet or covering the remote sensor window.

Note that infrared rays are liable to be reflected off walls or

the ceiling to cause the equipment to operate.

AUDIO mode

Leann &

USE, LEARN

BLOC

TAPE/VCR

oar

Sue

ta O95

fea

corse Se.

Gar pane

Ge Co a=

osrtay

aon

@®

VIDEO mode

Keys which can be preset

When the TRANSMIT mode selector switch is in the AUDIO

or VIDEO position, the learning function works for all keys

other than the SURROUND AMPLIFIER function keys. In the

AUX position, the learning function works for all keys.

Preset commands can be changed.

In the AUDIO and VIDEO positions, the unit is preset at the

factory with Pioneer's uniform remote control codes. If the

corresponding equipment is Pioneer, they can be used as they

are. If more operations than those first stored in the memory

are desired, use the learning function. In addition, it is possible

to restore the Pioneer uniform remote control codes even after

other codes have been preset. (Refer. to 'Returning to the Initial

Settings" for this procedure.)

In each mode one function per key may be programmed,

for a total of up to 154 functions.

e When presetting keys, make sure that the remote control

units of both this and the other component are loaded with

fresh batteries.

For some special types of infrared remote control units

programming may be impossible.

AUX mode

SASS

HHS

BG eae Seannet

cenonne gana

Tyee

Rysowenvon Wor

Ty oetay

Sea

= eee

by omc

masren

VPOWER VCR

feu yore

12SEs racer

ma)

NESTING

Co)

Ca) serene]

SS om

ave DELAY

— SURR:

opie Ta

psc

@ PIONEER

'AUDIO VIDED PROGRAMMABLE

REMOTE CONTROL UNIT

SYSTEM REMOTE By

CONTROL

SuseP REA

f y es)

'AME _ DELAY

SLEEP

REAR

Rean Vi

CoO)

@ PIONEER

ALOIG VIOEG PROGRAMMABLE

REMOTE CONTROL UST

SYSTEM REVOTE

SYSTEM REMOTE

CONTROL

In the AUDIO mode the TAPE function

keys can be preset with new functions

for the DAT position and the TAPE

position.

The initial

settings will remain

in the other position (43 keys can be

programmed.).

In the VIDEO mode the DAT/TAPE 1

switch is inoperative (43 keys can be

programmed.).

All buttons can be preset (68 keys can

be programmed.).

in the AUX

mode

the DAT/TAPE

switch is inoperative.