Dini Argeo ALP Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ваги Dini Argeo ALP. Dini Argeo ALP 19 сторінок.

2.3 Level Balance

Level the balance on a firm, steady surface. Avoid locations with excessive air current, vibrations, heat

sources or rapid temperature changes.

For use with CSA Certified (or

equivalent approved) power

source, which must have a

limited circuit output.

Without InCal – Power on the balance by pressing

. Press and hold Print/Cal until [CAL] is

displayed. The display flashes the calibration mass needed. To select the alternate calibration weight

press No. Put the calibration mass on the pan. The display flashes [BUSY], then [CLEAr Pan]. Remove

the mass. When calibration is complete, [DONE] is displayed.

InCal – Press and hold Print/Cal until [CAL] is displayed. The display flashes [BUSY], when calibration

is complete, [DONE] is displayed.

Note: Calibrations should be performed after a warm up time of 60 minutes.