Whirlpool 27' Інструкція з монтажу Посібник з монтажу - Сторінка 11

ELECTRICAL CONNECTION (U.S.A. ONLY)

Power Supply Cord

Electrical Connection Options

Choose electrical connection type

Power supply cord 4-wire receptacle

(NEMA Type 14-30R): Go to "4-wire

Power Supply Cord Connection" section.

Then, go to "Venting Requirements."

Power supply cord 3-wire receptacle

(NEMA Type 10-30R): Go to "3-wire

Power Supply Cord Connection" section.

Then go to "Venting Requirements."

4-wire direct connection: Go to "4-wire

Direct Wire Connection" section. Then go

to "Venting Requirements."

3-wire direct connection: Go to "3-wire

Direct Wire Connection" section. Then go

to "Venting Requirements."

NOTE:

If local codes do not permit connection of a

cabinet-ground conductor to neutral wire, go to "Optional

3-wire Connection" section. This connection may be

used with either a power supply cord or a direct wire

connection.

Direct Wire

Remove terminal block cover

Before you start, disconnect power. Remove hold-down

screw (D) and terminal block cover (A).

A. Terminal block cover

B. External ground conductor screw

C. Center terminal block screw

D. Hold-down screw

E. Neutral ground wire

F. Hole below terminal block cover