Firesense LIP-10A-TGG-NTS-1 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Обігрівач для внутрішнього дворика Firesense LIP-10A-TGG-NTS-1. Firesense LIP-10A-TGG-NTS-1 17 сторінок. Outdoor patio heater

Друкувати сторінку

1. To protect your heater from strong winds, it is best to anchor the base securely to the ground. There

are two methods you may use to secure the base.

OPTION A (for solid ground such as concrete):

Using the holes in the Base as a template, drill

4 - 12.5-13mm diameter holes (1/2") that are

at least 300mm (4") deep. Fig. 1

Then insert the Expandable Bolts (4 pcs) into

the holes. Fig. 2

Slide the Base down over the Expandable

Bolts. Fig. 3

Affix the Base to the Expandable Bolts using

the M6 Nut/Lock Washer/Washers. Fig. 4

Hardware Used: 4 - M8x110 Expandable Bolts, 4 - M8 Nut/Lock Washer/Washer

OPTION B (for soft ground such as soil):

Set the Base in the desired location. Insert

Anchoring Pin through hole in Base and using

a rubber mallet, tap the Anchoring Pin into the

soil. Fig. 1

Repeat with the other 3 - Anchoring Pins to

secure the Base to the soil. Fig. 2

Hardware Used: 4 - Anchoring Pins

ASSEMBLY

1 - B

1 - A