Direct power BC185J Посібник з техніки безпеки та експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з техніки безпеки та експлуатації для Пила. Direct power BC185J. Direct power BC185J 17 сторінок. 7 1/4" circular saw

Друкувати сторінку

ﬁg10.Then ﬁrmly tighten the screws.

4.Check the distance between the riving knife and

the toothed rim of the saw blade is not more than

5mm.The toothed rim does not extend more than

5mm beyond the lower of the riving knife.

WORKING

HINTS

CIRCULAR SAW

1.If your power tool becomes too hot, run no load

for 2-3 minutes to cool the motor.

2.Always use a blade suited to the material and

material thickness to be cut.

3.The quality of cut will improve as the number of

blade teeth increase.

4.Always ensure the workpiece is ﬁrmly held or

clamped to prevent movement.

5.Support large panels close to the cut line.

6.Any movement of the material may affect the

quality of the cut.

MAINTENANCE

There are very few user serviceable parts in this

machine, the only parts which can be changed

safely by the user are:

1.The mains plug

2.The circular blade

To clean the unit, wipe the outer casing using a

damp cloth. Do not use abrasive cleaners, thin-

ner, etc. on this product. Refer servicing to a qual-

iﬁed service personnel.

TROUBLESHOOTING

1.If your circular saw will not operate, check plug

fuse and power at mains plug.

2.There are no user serviceable parts in the saw

other than those listed in Care and Maintenance.

3.If a fault is suspected return to an authorised

dealer to repair.

CIRCULAR SAW

FOR

YOUR

��

Fig 9

Fig 10

BC185J

��