Xerox DocuColor 260 Примітка до випуску - Сторінка 13

Переглянути онлайн або завантажити pdf Примітка до випуску для Ксерокс. Xerox DocuColor 260. Xerox DocuColor 260 41 сторінка. Docucolor advanced multifunction
Також для Xerox DocuColor 260: Посібник з експлуатації (12 сторінок), Посібник користувача (32 сторінок), Технічні характеристики (8 сторінок), Посібник для оцінювачів (14 сторінок), Посібник для оцінювачів (16 сторінок)

Page 13

Manual Duplex

The Manual Duplex option is not designed for use with product finishing options, certain

folding or stapling options, or for use with some Mixed Media features. When using the

Manual Duplex option, observe the following limitations:

Manual Duplex with mixed page sizes

Printing jobs that have mixed page sizes using the Manual Duplex option is not supported.

Manual Duplex Quantity/Pages displays incorrectly

While a Manual Duplex job is printing, the number of copies and number of pages may

display incorrectly at copier touch panel.

Manual duplex

When printing a Manual duplex job from Tray 5 (Bypass), the on-screen instructions do not

indicate that before reloading paper for Side 2, you must first remove any unused paper from

the Tray 5, otherwise the job will not continue.

Fasten Mode

For a folded and stapled booklet, the maximum number of sheets is 15 (a 60-page booklet).

For a folded, unstapled booklet, the maximum number of sheets is 5 (a 20-page booklet).

If your booklet is larger than 60 pages and you choose folding and stapling, the finisher will

not staple it and will output the job in multiple sets of 5 folded sheets.

Imposition Reduction

The Imposition Reduction option is supported in the PostScript printer driver only.

For booklet printing from the PCL printer driver, Imposition Reduction is always enabled.

Centering Adjustment and Creep Adjustment and Booklet Maker

The Centering Adjustment and Creep Adjustment options apply only to booklet printing.

You must set the Booklet Maker option before you can set these options.

Printer Screen Mode and color objects

If you set the Printer Screen Mode option to Enhanced Text & Graphics or Enhanced Text,

you might see a color difference between text, graphics, and image objects. If this occurs, set

the Printer Screen Mode option to 200 Cluster Dot or 200 Rotated Line instead.

Printer Screen Mode and large text

If a document contains text in a large font size, set the Printer Screen Mode to Enhanced Text

& Graphics, 200 Cluster Dot, or 200 Rotated Line instead of Enhanced Text. This ensures

that the same screen is applied to small text objects and large text objects.