Xerox DocuColor 260 Примітка до випуску - Сторінка 15

Переглянути онлайн або завантажити pdf Примітка до випуску для Ксерокс. Xerox DocuColor 260. Xerox DocuColor 260 41 сторінка. Docucolor advanced multifunction
Також для Xerox DocuColor 260: Посібник з експлуатації (12 сторінок), Посібник користувача (32 сторінок), Технічні характеристики (8 сторінок), Посібник для оцінювачів (14 сторінок), Посібник для оцінювачів (16 сторінок)

Page 15

Layout option and line widths

If you print with the Layout option (N-up Layout) set to any setting besides 1-up, some line

widths may vary.

Media Type selections grayed (Windows)

In the Windows printer drivers, a Media Type setting appears dimmed if there are other print

options selected that would be in conflict with that Media Type setting. You can still select a

dimmed setting, and you can have the printer driver resolve the conflict automatically.

Custom page size and Face-Down Printing

If you print to a custom page size and set the Face-Down Printing option to Face Down, the

page dimensions must be within the following ranges, otherwise the job is printed Face Up:

• Width: 139.7 to 330 mm (approx. 5.5 to 13 inches)

• Length: 182 to 488 mm (approx. 7.17 to 19.2 inches)

Paper size

When you send a job from an application (such as Microsoft Word) that allows you to specify

paper size in the Print dialog box, select the same paper size in both the application's Page

Setup dialog box and the printer's Properties dialog box.

Before printing your job, verify that the paper size selection in Document Setup and

Page Setup are the same. This resolves problems with the printed output, such as

image clipping and unintentional scaling.

Custom page sizes

To print custom page sizes, for example, Statement-size (5.5 x 8.5 in), you must select

PostScript Custom Page Size (PS) or Custom Page Size (PCL) in the printer driver (or source

application) and for the copier tray selection.

When printing Custom page sizes, there may be an approximately 60-second delay between

job request and start time.

For general information about printing Custom pages sizes, see Printing from Windows and

Printing from Mac OS. For OS-related details, see the following sections:

Custom page size (Windows)

When you specify a custom page size in the Windows printer driver, make sure that the

custom size matches the page size specified in your application. If the page sizes do not match,

the custom page size may not print correctly.

You can print to a custom page size from Tray 1, Tray 2, or Tray 5 (Bypass). For Tray 1 or

Tray 2, set the page dimensions at the copier under Setup > Paper Tray Attributes. If the

document that you want to print has a page size of 220 x 297 mm, for example, set x =220