Yamaha AW2816 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Музичний інструмент Yamaha AW2816. Yamaha AW2816 32 сторінки. Professional audio workstation, recording101
Також для Yamaha AW2816: Посібник з експлуатації (2 сторінок), Посібник з оновлення (2 сторінок), Навчальний посібник (31 сторінок)

The Musician

All good recordings start at the source so it is very important that the musical instruments used in

the recording are in tune and that you have the best possible quality of sound. If necessary, put

new strings on the guitars, new heads on the drums, etc. before recording a performance.

The acoustical environment will also play a very large role in getting a quality recording. Record

a performance in a room that does not have serious acoustical problems such as standing waves,

or multiple reflections. If the room sounds bad it is going to be very difficult to get a good

recording. A little bit of acoustic foam or sound insulation in the recording room will do

wonders for the sound. There are many informative books available at local music stores that

cover the acoustical treatment of the studio in much greater detail.

It is also important to record a quality performance. No amount of equalizing, or processing, can

appreciably improve a bad performance. If it is not a good performance or it is not recorded

properly it will be very difficult to fix later on. Musicians should be well rehearsed and prepared

to perform at their best.

A microphone is a type of transducer – a device that converts one form of energy into another.

There are many types of transducers that are used to convert acoustic energy to electrical energy

(microphones) and then back into acoustic energy (speakers). A microphone is used to record

any instrument that does not have an internal pickup or does not output an electrical signal.

Electric guitars and basses have pickups, also a type of transducer, that convert acoustical signals

into to electrical signals. This makes it possible to plug the electric guitar or bass directly into a

mixing console without a microphone. For acoustic reasons, though, it may be more desirable to

plug the electric guitar or bass into an amplifier and then use a microphone to pickup the

acoustical signal from the amplifier. Keyboards, sound modules, and drum machines output an

electrical signal and so they are usually connected directly to the mixing console.