Yamaha Clavinova CLP-500 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha Clavinova CLP-500. Yamaha Clavinova CLP-500 11 сторінок. Yamaha keyboard
Також для Yamaha Clavinova CLP-500: Посібник користувача (12 сторінок), Посібник користувача (11 сторінок), Посібник користувача (11 сторінок)
Друкувати сторінку
[HOW TO USE MIDI
The MIDI Function of Clavinova
What MIDI can do:
® Transmission/recognition of key on/off data.
® Transmission/recognition of panel voice numbers.
® Transmission/recognition of control for DAMPER
and SOFT/SOSTENUTO.
Clavinova Connection With Other MID/
Instruments
In the following section you will see how you can
actually connect
your Clavinova
with other MIDI
instruments.
@ Playing the Clavinova
in ensemble
with other
keyboards
(Example: connected with the PortaTone)
MIDI OUT
PortaTone
Clavinova
As shown in the illustration above, when the MIDI
OUT on the Clavinova is connected to the MIDI IN
on the PortaTone
it is possible to produce sound
from the PortaTone while playing just the Clavinova.
In other words, the information produced by press-
ing the Clavinova keyboard is instantaneously trans-
mitted to the PortaTone, producing a richer sound.
It is also possible to utilize different voices on each
instrument. For example, it is possible to combine a
piano voice on the Clavinova with the strings voice
on the PortaTone so that a solo performer can give
a performance similar to a piano concerto. This is
just one of the many
possible combinations.
You
can
also connect
the MIDI
OUT
terminal
of the
PortaTone to the MIDI IN terminal of the Clavinova
and play from the PortaTone keyboard.
@ Playing the Clavinova With a Music Computer
You can get further pleasure from your Clavinova by
playing it with a personal computer instead of playing
the keys yourself. Whether you use a music software
package or program your own software, the Clavinova
can be played automatically. In this case, the voices
can be freely selected on the control panel to match
the mood of the music.
MIDI IN
MIDI OUT
Clavinova
Music Computer
re ee
Controlling the MIDI Function
A) With the Power on
@ The receiving channel is set to CH 1. However,
any channel can be received with OMNI ON. (When
the power is turned on, itis automatically set to
OMNI ON.)
@ Program change is acceptable. (Condition for send-
ing and receiving voice number.)
@ The Control Change is the state for sending and
receiving control
signals for the DAMPER
and
SOFT/SOSTENUTO.
piano
* PIANC?
wAhpsicndho CELESTA
° wise
°
GUITAR
COCO
OeOOeO
CO
B) Setting transmission channel number:
While pressing the TRANSPOSER/MIDI button, press
one of the keys between
C: and D#2 to set'the
channel number (see illustration below).
C) Switching to OMNI
OFF and setting reception
channel:
While pressing the TRANSPOSER/MIDI button, press
the PIANO 1 button and switch to OMNI OFF. If the
button is pressed again, it will be turned ON. Next,
while pressing the TRANSPOSER/MIDI button, press
one of the keys between Cs and D#.4 to set the
channel number (see illustration below).
D) Switching to Local Off
While pressing the TRANSPOSER/MIDI button, press
the PIANO 2 button. If the button is pressed again,
it will be turned ON.
E) Cancelling
Program
Change
(To
cancel
the
transmission of the information to change the
voice):
While
keeping
the
TRANSPOSER/MIDI
button,
depressed,
press the E. PIANO
1 button.
If the
button is pressed again, it will be activated.
F) Cancelling Control Change (To cancel the trans-
mission of the information to control the DAMPER
and SOFT/SOSTENUTE pedals):
While pressing the TRANSPOSER/MIDI button, press
the E. PIANO
2 button.
If the button
is pressed
again, it will be activated.
IMPORTANT NOTICE: MIDI instruments and equip-
ment have slightly differing specifications. Refer to the
respective MIDI Implementation Charts to determine
what is and what is not possible. The MIDI Implemen-
tation Chart for your Clavinova is on the final page
of this manual.
ARIMA In|
For setting the sending channel. (C1 ~
a
For setting the receiving channel.
a
~D#a)