Yamaha DME32 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha DME32. Yamaha DME32 16 сторінок. Digital mixing engine
Також для Yamaha DME32: Посібник з налаштування обладнання (12 сторінок)
Друкувати сторінку
8
Recall Safe
With the new Recall Safe function, parameter settings can be left unchanged when
scenes are recalled. Recall safe can be applied at the configuration, component, or
parameter level.
Recall safe applies to rotary controls, sliders, and buttons but not combo boxes (e.g., the
SLOPE & TYPE boxes of the crossover components).
Recall Safe for Individual Parameters
Select the control of the parameter that you want to make safe.
1
The selected control is highlighted by a green box.
While holding down the shift key, right-click the control.
2
The following menu appears.
Choose Recall Safe.
3
The selected control is made safe. Next time this menu is accessed for this parameter, a
check mark is displayed next to "Recall Safe", indicating that the parameter is safe.
Controls, sliders, buttons, etc., appear red when they are set as safe.
Safe parameters are not changed when scenes are recalled.
To turn off recall safe, access the previous menu and choose Recall Safe again.
4
The recall safe setting of individual parameters cannot be changed in Run mode.
Recall Safe for Individual Components
Select the component that you want to make safe.
1
The selected component is highlighted by a red box.
While holding down the shift key, right-click the component.
2
The following menu appears.
DME32—Owner's Manual Supplement