Yamaha DME32 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha DME32. Yamaha DME32 16 сторінок. Digital mixing engine
Також для Yamaha DME32: Посібник з налаштування обладнання (12 сторінок)

Друкувати сторінку
Yamaha DME32 Посібник користувача
Choose Recall Safe.
3
The selected component is made safe. Next time this menu is accessed for this compo-
nent, a check mark is displayed next to "Recall Safe", indicating that the component is
safe.
Safe components are not changed when scenes are recalled.
To turn off recall safe, access the previous menu and choose Recall Safe again.
4
The recall safe setting of individual components cannot be changed in Run mode.
Recall Safe for Configurations
Click the Recall Safe icon
1
Alternatively, choose Recall Safe All Components from the Tool menu.
A confirmation dialog box appears.
Click Yes to enable recall safe for all components.
2
All components are made safe. Next time the Recall Safe All Components menu is
accessed, a check mark is displayed next to "Recall Safe All Components", indicating
that all components are safe.
Safe components are not changed when scenes are recalled.
To turn off recall safe, click the Recall Safe icon on the Tool Bar.
3
Alternatively, choose Recall Safe All Components from the Tool menu.
The recall safe setting of all components cannot be changed in Run mode.
Keyboard & Scrolling Mouse Control
Rotary and slider controls can now be adjusted by using the up/down cursor keys and
Page Up/Page Down keys on your computer keyboard, or the scroll wheel on a scrolling
mouse. In addition, gain, level, and frequency values can be entered from the keyboard.
Select the control that you want to adjust.
1
The selected control is highlighted by a green box.
Use the Up/Down cursor keys, Page Up/Page Down keys, or the scroll wheel
2
on a scrolling mouse to increment or decrement the value of the selected
parameter.
To enter a gain, level, or frequency value from your keyboard, select the
3
parameter value by double-clicking it, enter the new value by using the
numeric keys, and then press Enter.
on the Tool Bar.
DME32—V1.5 Owner's Manual Supplement
9