Yamaha AX-892 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha AX-892. Yamaha AX-892 24 сторінки. Natural sound stereo amplifier

IMPEDANCE SELECTOR switch

Make sure that the power to the unit is off, before you set the

switch.

Select the appropriate setting for your speaker system.

Upper position

4 Ω: If you use either speaker system A or B, the impedance

of each speaker must be 4 Ω, or higher.

8 Ω: If you use both speaker systems A and B at the same

time, the impedance of each speaker must be 8 Ω, or

higher.

Lower position

6 Ω: If you use either speaker system A or B, the impedance

of each speaker must be 6 Ω, or higher.

12 Ω:If you use both speaker systems A and B at the same

time, the impedance of each speaker must be 12 Ω, or

higher.

A OR B : 4 MIN. /SPEAKER

A + B : 8 MIN. /SPEAKER

A OR B : 6 MIN. /SPEAKER

A + B :12 MIN. /SPEAKER

WARNING

Do not change the IMPEDANCE SELECTOR switch

setting while the power to this unit is on, otherwise

this unit may be damaged.

IF THIS UNIT FAILS TO TURN ON WHEN THE POWER

SWITCH IS PRESSED

The IMPEDANCE SELECTOR switch may not be set to

either end closely. If so, set the switch to either end

closely.

VOLTAGE SELECTOR switch (General model only)

If the pre-set setting is incorrect, set the switch to the proper

voltage for your area.

Consult your dealer if you are unsure of the correct setting.

WARNING

Be sure to unplug the unit before setting the VOLTAGE

SELECTOR switch.

240V